Our Projects

STANDARD OFFSHORE have done various projects for offshore drilling companies, and have since made very good impression on the service and quality of our work.

Below are a few Project References of what we have done and provided for valuable clients.

Accommodation Refurbishment & Piping Work

Location: Malaysia
Asset: ENSCO52
Year: 2015
Duration: 28 Days
SOS Manpower: Project Supervisor, Carpenters, Piping Specialists


STANDARD OFFSHORE was engaged to assist in refurbishing various areas within the Accommodation blocks, including the Mess Room. We are also asked to identify and rectify the various pipe clogs within the Pump Room and change the pipe at the identified areas.


Project Scope

  • Provide materials, removal and installation of the selected toilet ceilings and toilet fittings, as well as replacement of the Mess Room's floor.
  • Provide materials, removal, installation and expansion of S.R. 316.
  • Identify, Renewal and Rectification of pipe clogs within the Pump Room area.

Client's Feedback
"I know this was tight. Thank you for getting all the work done ahead of schedule and all the support both backend and on site."


Troubleshooting of Chiller & Freezer Leakage

Location: Myanmar
Asset: ENSCO5005
Year: 2014
Duration: 9 Days
SOS Manpower: Project Supervisor, HVAC Specialist


STANDARD OFFSHORE were asked to travel offshore and provide the service to troubleshoot on the Chiller and Freezer leakage that is causing a lot of noise from the leaking area.


Project Scope

  • Provide troubleshooting for the Chiller & Freezer.
  • Rectify the leakage problem with spares on board wherever possible.
  • Provide multi-discipline specialist to install the fabricated materials.
  • Clean the Chiller Compressor as required.

Client's Feedback
"The HVAC specialist were very knowledgeable and experience in handling HVAC issues. They are very tactful on the problems face and give us valuable solutions. Thank you for the hard work."


Fire Safety Equipment & System Inspection

Location: Singapore
Asset: Songa Venus
Year: 2015
Duration: 7 Days
SOS Manpower: Project Supervisor, FFE Inspection Specialist


STANDARD OFFSHORE were asked to test, refill and provide recertification for the Fire Fighting Equipment and System on board accordingly based on the equipment/ systems being due annually, 5 yearly or 10 yearly.


Project Scope

  • Provide Inspection on all the Fire Fighting Equipment and System on board.
  • Provide the hardcopy and softcopy of the Certificates.

Client's Feedback
"The team doing the inspection was professional and did a wonderful job on board, obeying to instructions and giving solutions to any issues found. Well Done!"


Infrared Thermography Survey

Location: Singapore
Asset: ENSCO106
Year: 2017
Duration: 10 Days
SOS Manpower: Level I Infrared Thermography Survoyer


STANDARD OFFSHORE were engaged the second time to perform the Infrared Thermography Survey for their onboard electrical equipment/ panels, and to ensure that all equipments are not overheated, and when hot spot was spotted or when abnormility was found, we will notify the electrican immediately.


Project Scope

  • Test and survey all requried Electrical Equipments/ Panels onboard the rig with the assistance of Electrician to open the panels
  • Provide proper IRT Inspection Report.

Client's Feedback
"Standard Offshore team continues to give fantastic services in all jobs that we have received from them. Very professional and safe organization. Thanks."


Pressure Relieve Valves & Gauges Inspection

Location: Singapore
Asset: ENSCO104
Year: 2015
Duration: 10 Days
SOS Manpower: Supervisor, PRV Specialist


STANDARD OFFSHORE were asked to provide the annual testing and recertification for the rig when it was stopping over in Singapore so that they can get their PRVs and gauges recertified before they start drilling in Middle East.


Project Scope

  • Provide testing, calibration and recertification of all the valves and gauges provided by the toolpusher.
  • Provide addition calibration services for Gas Regulator, Weighing Machine as well as Chart Recorders.
  • Provide the hardcopy and softcopy of the Certificates.

Client's Feedback
"The team was meticulous and complete the job within the stated duration provided. Supervisor was very cooperative when asked on solutions and tries his very best to find answer. Office support was very quick as well."


Asbestos Survey - Air & Bulk Sampling

Location: Singapore
Asset: Stena Clyde
Year: 2014 - 2015
Duration: 45 Days
SOS Manpower: Project Supervisor, Asbestos Assessors


STANDARD OFFSHORE carried out daily Asbestos Air Sampling while the rig was in Singapore doing some carpentry job in Singapore Shipyard to ensure there are no asbestos fiber found in the air while the work is in progress.


Project Scope

  • Provide one Asbestos Assessor to take a total of 450 Air Samples for a period of 45 days.
  • Samples are taken indoors only, i.e. Accommodation Blocks, Engine Room, etc.
  • Provide Laboratory Report for the samples daily.

Client's Feedback
"Service Excellent"


Fabricate & Installation of Bases for Man Riding Hoist

Location: Singapore
Asset: ENSCO109
Year: 2014
Duration: 10 Days
SOS Manpower: Project Supervisor, Multi-Discipline Specialist (with Rope Access)


STANDARD OFFSHORE were engaged to fabricate the Man Riding Hoist for the base of sheave and winch, and to ensure all the joins are properly welded by performing NDT Inspection after installation.


Project Scope

  • Fabrication of the Swing Jig, Equipment Pedestal, Winch Base and Sheave.
  • Provide multi-discipline specialist to install the fabricated materials.
  • Provide NDT Inspection on the welded areas to ensure there are no cracks.
  • Provide NDT Inspection Report.

Client's Feedback
"There were some delays on materials availability but the team was very professional and obey to safety requirements whenever they are on board. Overall, job well done on board."